Drill Press 9400

Infinitely Variable Speed

Features

Variable speed from 0 to 1200 rpm
Adjust speeds while operating in the material
High torque at low rpm speeds
Instantaneous reversing for tapping
Tapping head is not needed
Machine tap goes into ball bearing chuck
Can tap either left or right handed threads
Drill head and table rotate 360° around column
Smooth operating table raiser
Fully enclosed spindle
Quill lock and depth control
Same ball bearing chuck holds both drill and tap

Speed control

Continuous speed adjustment while in operation
Instantaneous reversing for tapping
One turn on knob for adjusting speed (0 to 1200 rpm)

Specifications Ellis 9400 Drill Press

Motor 2 HP A.C. single phase-choose 110/220

Control box

Infinitely variable speed with a turn of the dial

Instantaneous electronic reversing

Full torque at low speeds

All solid state circuitry

Continuous speed adjustment while in operation

Spindle speeds 0 – 1200 RPM

Drills to center 18 1/8”

Drilling capacity steel 1 1/16”
cast iron 1 1/4”

Tapping capacity 3/4”

Morse taper No. 3

Quill diameter 3”

Column diameter 4”

Spindle travel 5 3/8”

Spindle to table (max.) 27 1/4”

Spindle to base 46 1/4”

Shipping weight 675 lbs

Table
production type:
t- slotted 15 7/8” X 17 7/8”
2 Slots for 1/2” t-bolts
ground working surface
coolant trough

Base t- slotted
16 3/8” x 26 5/8”
2 slots for 1/2” t-bolts
ground working surface

Size height 69 1/2”
width 20”
depth 29”

Options power down feed
ball bearing chuck
drill press vise
round table

1-800-383-5547 | Fax (608) 845 5199 | Ellis Mfg. Company, Inc., 107 W. Railroad Street, P.O. Box 930219, Verona, WI 53593-0219

Specifications	Ellis 9400 Drill Press
Motor	2 HP A.C. single phase-choose 110/220
Control box	Infinitely variable speed with a turn of the dial Instantaneous electronic reversing Full torque at low speeds All solid state circuitry Continuous speed adjustment while in operation
Spindle speeds	0 – 1200 RPM
Drills to center	18 1/8”
Drilling capacity	steel 1 1/16” cast iron 1 1/4”
Tapping capacity	3/4”
Morse taper	No. 3
Quill diameter	3”
Column diameter	4”
Spindle travel	5 3/8”
Spindle to table (max.)	27 1/4”
Spindle to base	46 1/4”
Shipping weight	675 lbs
Table	production type: t- slotted 15 7/8” X 17 7/8” 2 Slots for 1/2” t-bolts ground working surface coolant trough
Base	t- slotted 16 3/8” x 26 5/8” 2 slots for 1/2” t-bolts ground working surface
Size	height 69 1/2” width 20” depth 29”

Options	power down feed ball bearing chuck drill press vise round table