Drill Press 9500

Infinitely Variable Speed

Features

Variable speed from 0 to 1200 rpm
Digital RPM readout
Adjust speeds while operating in the material
High torque at low rpm speeds
Instantaneous reversing for tapping
Tapping head is not needed
Machine tap goes into ball bearing chuck
Can tap either left or right handed threads
Drill head and table rotate 360° around column
T-slotted production table raises & lowers effortlessly
Fully enclosed spindle
Quill lock and depth control
Same ball bearing chuck holds both drill and tap

Speed control

Continuous speed adjustment while in operation
Instantaneous reversing for tapping
One turn on knob for adjusting speed (0 to 1200 rpm)

Specifications Ellis 9500 Drill Press

Motor 2 HP D.C. Plug in 220 Single Phase or
1 1/2 HP A.C. Single Phase-choose 110/220

Control Box

Infinitely variable speed with a turn of the dial

Instantaneous electronic reversing

Full torque at low speeds

All solid state circuitry

Continuous speed adjustment while in operation

Spindle Speeds 0 – 1200 RPM

Drills To Center 20”

Drilling Capacity Steel 1 1/16”
Cast Iron 1 1/4”

Tapping Capacity 3/4”

Morse Taper No. 3

Quill Diameter 2 1/8”

Column Diameter 4”

Spindle Travel 5 1/8”

Spindle To Table (max.) 26 1/2”

Spindle To Base 48 1/8”

Shipping Weight 500 lbs

Table
Production Type:
T- Slotted 16 5/8” X 18 5/8”
2 Slots for 1/2” T-bolts
Ground Working Surface
Coolant Trough

Base T- Slotted
18” X 25 1/2”
2 Slots for 1/2” T-Bolts
Ground Working Surface

Size Height 70 1/2”
Width 20”
Depth 34 1/4”

Options Ball Bearing Chuck
Drill Press Vise

1-800-383-5547 | Fax (608) 845 5199 | Ellis Mfg. Company, Inc., 107 W. Railroad Street, P.O. Box 930219, Verona, WI 53593-0219

Specifications	Ellis 9500 Drill Press
Motor	2 HP D.C. Plug in 220 Single Phase or 1 1/2 HP A.C. Single Phase-choose 110/220
Control Box	Infinitely variable speed with a turn of the dial Instantaneous electronic reversing Full torque at low speeds All solid state circuitry Continuous speed adjustment while in operation
Spindle Speeds	0 – 1200 RPM
Drills To Center	20”
Drilling Capacity	Steel 1 1/16” Cast Iron 1 1/4”
Tapping Capacity	3/4”
Morse Taper	No. 3
Quill Diameter	2 1/8”
Column Diameter	4”
Spindle Travel	5 1/8”
Spindle To Table (max.)	26 1/2”
Spindle To Base	48 1/8”
Shipping Weight	500 lbs
Table	Production Type: T- Slotted 16 5/8” X 18 5/8” 2 Slots for 1/2” T-bolts Ground Working Surface Coolant Trough
Base	T- Slotted 18” X 25 1/2” 2 Slots for 1/2” T-Bolts Ground Working Surface
Size	Height 70 1/2” Width 20” Depth 34 1/4”

Options	Ball Bearing Chuck Drill Press Vise