Enlarge Image

Testimonials

Drill Press 12000

Infinitely Variable Speed

Features

• Variable speed from 0 to 1800 rpm
• Digital RPM readout
• Adjust speeds while operating in the material
• High torque at low rpm speeds
• Instantaneous reversing for tapping
• Tapping head is not needed
• Machine tap goes into ball bearing chuck
• Can tap either left or right handed threads
• Drill head and table rotate 360° around column
• Smooth operating table raiser
• Heavy duty spindle for milling
• Quill lock and depth control

Speed control

• Continuous speed adjustment while in operation
• Instantaneous reversing for tapping
• One turn on knob for adjusting speed (0 to 1800 rpm)

Specifications	Ellis 12000 Drill Press
Motor	2 HP D.C. plug in 220 single phase
Control box	Infinitely variable speed with a turn of the dial Continuous speed adjustment while in operation 220 volt A.C. single phase input Instantaneous electronic reversing Full torque at low speeds All solid state circuitry
Spindle speeds	0 – 1800 RPM
Drills to center	16”
Drilling capacity	steel 1 1/16” cast iron 1 1/4”
Tapping capacity	3/4”
Morse taper	No. 3
Quill diameter	3”
Column diameter	4 1/2”
Spindle travel	5”
Spindle to table (max.)	23 1/2”
Spindle to base	46”
Shipping weight	750 lbs
Table	production type: t- slotted 19” x 21 1/4” 2 slots for 1/2” t-bolts ground working surface coolant trough
Base	t- slotted 18 1/2” x 26” 2 slots for 1/2” t-bolts ground working surface
Size	height 71” width 28 3/8” depth 32 3/8”
Options	ball bearing chuck drill press vise power down feed milling table

Site Map | Mitre Band Saws | Band Saw Blades | Belt Grinder | Drill Press | Support | About Ellis | Contact | Links | Admin

1-800-383-5547 | Fax (608) 845 5199 | Ellis Mfg. Company, Inc., 107 W. Railroad Street, P.O. Box 930219, Verona, WI 53593-0219

© 2008 Ellis Mfg, Inc. All rights reserved. | Website design and website marketing by Gum Design