Drill Presses Specifications

Specifications Ellis 12000 Drill Press Ellis 9500 Drill Press Ellis 9400 Drill Press
Motor 2 HP D.C. plug in 220 single phase 2 HP D.C. plug in 220 single phase or 1 1/2 HP A.C. single phase-choose 110/220 2 HP A.C. single phase-choose 110/220
Control box
  • Infinitely variable speed with a turn of the dial
  • Continuous speed adjustment while in operation
  • 220 volt A.C. single phase input
  • Instantaneous electronic reversing
  • Full torque at low speeds
  • All solid state circuitry
  • Infinitely variable speed with a turn of the dial
  • Continuous speed adjustment while in operation
  • Instantaneous electronic reversing
  • Full torque at low speeds
  • All solid state circuitry
  • Infinitely variable speed with a turn of the dial
  • Instantaneous electronic reversing
  • Full torque at low speeds
  • All solid state circuitry
  • Continuous speed adjustment while in operation
Spindle speeds 0 – 1800 RPM 0 – 1200 RPM 0 – 1200 RPM
Drills to center 16” 20” 18 1/8”
Drilling capacity steel 1 1/16”
cast iron 1 1/4” 		steel 1 1/16”
cast iron 1 1/4”		 steel 1 1/16”
cast iron 1 1/4”
Tapping capacity 3/4” 3/4” 3/4”
Morse taper No. 3 No. 3 No. 3
Quill diameter 3” 2 1/8” 3”
Column diameter 4 1/2” 4” 4”
Spindle travel 5” 5 1/8” 5 3/8”
Spindle to table (max.) 23 1/2” 26 1/2” 27 1/4”
Spindle to base 46” 48 1/8” 46 1/4”
Shipping weight 750 lbs 500 lbs 675 lbs
Table production type:
t- slotted 19” x 21 1/4”
2 slots for 1/2” t-bolts
ground working surface
coolant trough 		production type:
t- slotted 16 5/8” X 18 5/8”
2 slots for 1/2” t-bolts
ground working surface
coolant trough 		production type:
t- slotted 15 7/8” X 17 7/8”
2 Slots for 1/2” t-bolts
ground working surface
coolant trough
Base t- slotted
18 1/2” x 26”
2 slots for 1/2” t-bolts
ground working surface 		t- slotted
18” X 25 1/2”
2 slots for 1/2” t-bolts
ground working surface 		t- slotted
16 3/8” x 26 5/8”
2 slots for 1/2” t-bolts
ground working surface
Size height 71”
width 28 3/8”
depth 32 3/8” 		height 70 1/2”
width 20”
depth 34 1/4” 		height 69 1/2”
width 20”
depth 29”
       
Options ball bearing chuck
drill press vise
power down feed
milling table		 ball bearing chuck
drill press vise		 ball bearing chuck
drill press vise
power down feed

Specifications are subject to change without notice.