Infinitely Variable Speed

Features

  • Variable speed from 0 to 1200 RPM
  • Adjust speeds while operating in the material
  • High torque at low RPM speeds
  • Electronic reversing for tapping
  • Tapping head is not needed
  • Machine tap goes into ball bearing chuck
  • Taps left or right handed threads
  • Drill table rotates 360° around column
  • Smooth operating table crank
  • Fully enclosed spindle
  • Quill lock and depth control
  • Same ball bearing chuck holds both drill and tap

Speed control

  • Continuous speed adjustment while in operation
  • Electronic reversing for tapping
  • One turn on knob for adjusting speed (0 to 1200 RPM)

_R4A9091-2

Motor 2HP A.C. Single Phase
Choose 110V or 220V
Control box
  • Infinitely variable speed by turning the dial
  • Electronic reversing
  • Full torque at low speeds
  • All solid state circuitry
  • Continuous speed adjustment while in operation
Standard Power down feed
Spindle speeds 0 – 1200 RPM
Drills to center 18-1/8″
Drilling capacity Steel 1-1/16″
Cast iron 1-1/4″
Tapping capacity 3/4″
Morse taper No. 3
Quill diameter 3″
Column diameter 4″
Spindle travel 5-3/8″
Spindle to table (max.) 27-1/4″
Spindle to base 46-1/4″
Shipping weight 675 lbs
Table Production type:
T- slotted 15-7/8″ X 17-7/8″
2 Slots for 1/2″ t-bolts
Ground working surface
Coolant trough
Base T- slotted
16-3/8″ x 26-5/8″
2 slots for 1/2″ t-bolts
Ground working surface
Size Height 69-1/2″
Width 20″
Depth 29″
Accessories – Drill Press Part #
3/4″ Ball Bearing Chuck 4649
6″ Drill Press Vise 8237
4.5″ Drill Press Vise 8137
Mill Table 1003

Accessories

In the last 6 weeks I have purchased a 1600 saw, 6000 belt grinder and a 9400 drill press, all of which I am VERY satisfied.

I hear nothing but good things regarding your products.

I own a small fabricating company and am looking to upgrade the equipment in my shop.  I have used your products before and consider them to be the best.